The production process consists of coating and printing. Interior and exterior surface of sheets, such as tin plate, with a thickness of about 0.2 mm and large metal plates with a length and width of 1 meter are coated, and then each color is overprinted on each sheet.
Everything at TMB is done in house, including product control and tracking.
We make sure everything is tracked from the moment we receive your order until it is shipped to your warehouse.
It is the process of coating is the underlying work to bring the metal surface and the ink into close contact so it will not to come off, and the varnish (lacquer / clear) for protection of the inside and outside surfaces for years to come.
When printing on glossy material, finished image will be different from paper printing. In offset printing, colors are expressed by adjusting the density of each of the four colors CMYK (cyan, magenta, yellow, black), but there are colors that are difficult to express in multiplication of these four colors.
About the Printing Plate
We will print the ink evenly on the printing plate, then in metal printing, we will create a different printing plate for each color. By exposing the plate on which the photosensitizing agent has been applied in advance, an image area and a non-image area are created. When setting a plate on a printing machine (rotary press), ink and water are applied to the plate.
TMB Quality, we believe that no job is done, “Until Perfect”. Customer satisfaction is everything and is the heart of our business. We believe in the best service, best quality and best customer experience for repeat business. We strive to pursue better quality and contribute to society through our products.